![background image](http://html1.mh-extra.com/html/barco/flm-r22/flm-r22_user-manual_4136552117.webp)
11. Lamp menu
11.4 Constant Light Output mode (CLO mode)
What can be done?
Constant Light Output allows to force a constant light output (set in the
CLO Target lumens
item) of the projector over a certain
period. This will eliminate uncontrolled light output drop caused by natural aging of the lamp. The light output is checked every 5
minutes, if the target is not met, the lamp power is adjusted.
Setting CLO off means that the lamp will operate at constant power (no power adaptation to meet constant light output).
In the illustration below, a normal light output curve is shown over the
fi
rst 1000 hours, image 11-8. By using CLO and setting the
target to 60% of the maximum light output, one will be able to operate during approximately 500 hours with a constant light output,
image 11-9.
100
20
40
60
80
200
400
600
800
1000
Relative Light Output (%)
Runtime (hrs)
Image 11-8
100
20
40
60
80
200
400
600
800
1000
Relative Light Output (%)
Runtime (hrs)
Constant Light Output
working area
Image 11-9
How to set the CLO On or Off
1. Press
MENU
to activate the menus.
2. Use the
▲
or
▼
key to select
Lamp
and press
ENTER
.
3. Use the
▲
or
▼
key to select
Power
and press
ENTER
.
4. Use the
▲
or
▼
key to select
CLO mode
and press
ENTER
to toggle between
[On]
and
[Off]
R59770179 FLM R22+ 15/03/2010
113
Summary of Contents for FLM R22+
