![background image](http://html1.mh-extra.com/html/barco/flm-hd20/flm-hd20_user-manual_4134376017.webp)
2. General
3. Remove the carton box, the inner carton sleeve and the foam around the projector. See image 2-2.
Note:
The projector is still attached to a wooden plate, which is detached from the below pallet.
4. Gently turn the projector upside down to gain access to the four bolts, which secure the projector. Note that this wooden plate is
detached from the pallet.
Tip:
Lay a blanket (or the earlier removed foam) on the
fl
oor to protect the projector housing form scratches while turning.
Image 2-3
5. Remove the wooden plate from the projector bottom, by releasing the four bolts. Use an 8 mm Allen key. See image 2-3.
6. Gently turn the projector back on its feet.
7. Remove the foam rubber around the carrying handle.
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
A rubber foam inside a plastic bag is placed into the lens opening of the projector. It’s recommended to reuse
this foam and plastic back each time you transport the projector. This to prevent intrusion of dust and foreign
particles.
2.3
Box content
Content
•
One Barco FLM HD20, weight ±100 kg (±225 lb.).
•
One Remote Control Unit (RCU).
•
Two AA size batteries for the RCU.
•
One power cord of 2,5 meter with EN60-309 plug.
•
Four rigging clamps for projector suspension.
•
One user manual.
Initial inspection
Before shipment, the projector was inspected and found to be free of mechanical and electrical defects. As soon as the projector is
unpacked, inspect for any damage that may have occurred in transit. Save all packing material until the inspection is completed. If
damaged is found,
fi
le claim with carrier immediately. The Barco sales and service of
fi
ce should be noti
fi
ed as soon as possible.
The packaging of the FLM HD20 is provided with a shock-watch label. If this shock-watch label was triggered
(red colored at arrival) during transport, indicates that the package was possibly roughly handled by the trans-
port company. In this case, the instructions mentioned on the label, should be followed, which are: adding
a note on the “bill of lading” and informing the transport company and the Barco sales and service of
fi
ce as
soon as possible.
Mechanical check
This check should con
fi
rm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and
scratches, and that the meter face and operating panel are not scratched of cracked. The Barco sales and service of
fi
ce should be
noti
fi
ed as soon as possible.
R59770180 FLM HD20 11/07/2008
13
Summary of Contents for FLM HD20
