Changing projector source
Changing the projectors source from for example DVI to HDMI or back, you have to use the remote
control to do that. Press “Input” and select your source with the remote’s selection buttons. The
source indicator in the lower corner of the screen should disappear shortly when you have your
source showing something (for example the DVD player is on). Press “Input” button again to make
the display screen go away.
NOTE! The remote control can be used within the Magnetically Shielded Room (MSR). Just point the
remote towards the projector inside the MSR by the vault door. You can see your selections on the
screen. If the selection screen does not automatically go away after your work, press “Back” button
on the remote. Pressing “OSD” (On Screen Display) will also take away the selection screen, but you
have to remember to press it again to bring the display back when you need it.
NOTE! If you need your own HDMI source, for example, just change the HDMI cable to your own
source behind the projector. Unlike the old projector, this one has only one HDMI input.
