![background image](http://html1.mh-extra.com/html/barco/f90-w13/f90-w13_user-manual_4126017043.webp)
5. Getting started
Mode
Description
Ready
Projector is booted up but the light source is off
ECO Standby
Light source is switched off and projector electronics are
powered down
5.5
Customize projector settings
About
The projector display, behavior and user interface can be adjusted to meet individual requirements.
Options include:
•
Adjust the OSD menu color
5.6
User interface
Overview
•
5.6.1
On Screen Display (OSD)
About
The projector on screen display (OSD) is the primary user interface (UI). From here, you can review and adjust all projector and
display settings.
The OSD interface uses tabs to display the main menu. Topics are then further sorted and displayed by function: main (topic) —
sub (function) — sub (function).
There are six main menu tabs: Source, Image, Installation, System settings, Test pattern and Status.
User access levels
The projector’s software platform uses access levels to de
fi
ne what each user can do.
There are two user access levels: Standard User and Power User. In addition, there is a Service user access for certi
fi
ed Service
personnel.
A standard user has access to all projector functionality and OSD menu items. A power user has, in addition to access to all projector
functionality and OSD menu items, access to a number of advanced functions. Access to power user features is password-protected.
Contact your projector supplier for more information.
Navigation
You can navigate the OSD using the local keypad.
Press the MENU button to display the OSD.
Use the arrow keys to navigate left, right, up and down.
Press the OK button to select a menu topic and get more options.
Use the numeral keys to enter values, or use the arrow keys to move the barscale up or down.
Press MENU again to exit the menu system.
Press the OSD button to deactivate the OSD on the screen. Only critical warnings will be displayed.
Some menu options are reserved for Power or Service Users; these will be grayed out and not available for
selection when in standard user mode. To access these features, enter your Power or Service Code in the
Service Menu or contact your support representative for more information.
De
fi
ne values
Menu settings are displayed using checkboxes, barscale sliders, and drop-down lists.
To set a value:
601–0400–00 F90–W13 18/08/2016
39
Summary of Contents for F90-W13
