![background image](http://html1.mh-extra.com/html/barco/f90-w13/f90-w13_user-manual_4126017041.webp)
5. Getting started
Parameter
Value
Return loss
>10dB at 3GHz
Impedance
75 ohm resistive
5.1.2.5
HDBase T
Speci
fi
cations
Parameter
Value
Reference speci
fi
cation
HDBaseT 1.0 Speci
fi
cation, June 2010
Connector
Standard RJ-45, 8P8C
Signal characteristics
HDBaseT
Max. cable length (1080p/48b/60Hz)
100 m (Cat5e/6), Pixel Clock <=225HHz, Video Datarate
<=5.3Gbps
70 m (Cat5e/6), Pixel Clock >225HHz, Video Datarate
>5.3Gbps
100 m (Cat6a/7), Pixel Clock >225HHz, Video Datarate
>5.3Gbps
Max TMDS Clock Frequency
270 MHz
Max video resolution supported
1920x1200 @60Hz (WUXGA 60Hz)
HDCP Pass-Through
Yes, from Source to Projector
CEC Pass-Through
Yes, from Source to Projector
IR Extension
Not Supported
RS-232 Extension
Not Supported
10/100Mbps Ethernet Pass-Through
Not Supported
Fallback to 100BaseTx, IEEE 802.3u
Not Supported
USB Over Centre Tap
Not Supported
Power Over Ethernet
Not Supported
Audio
Not Supported
LEDs - HD Base Status
Operation: Green, Left
Link/Mode: Yellow, Right
5.1.3
Control interfaces
About
The following control interfaces are available on the projector:
•
1x RS-232 (for projector control)
•
1x LAN/Ethernet (for projector control
•
3x USB-A ports
Overview
•
•
•
5.1.3.1
RS-232
Speci
fi
cations
Parameter
Value
RS-232 connector
1 female DB9 connector (RS232-in) for projector control and
debug
601–0400–00 F90–W13 18/08/2016
37
Summary of Contents for F90-W13
