Barco F80-4K7, User Manual

Page: 51 / 86

8. GUI – Installation
Image 8-12
Warp menu, 4 Corners
The 4 Corners menu is displayed.
Image 8-13
4 Corners Warping
2. To enable 4 Corners warping, make sure the 4 corners slider is set to On .
The slider is enabled when set to the right and when it is colored blue.
3. To set warping on one or more of the four corners, select one of the four corners.
4. Set the desired X and Y coordinates for this corner, using the arrow keys.
Tip: A red border corner will be projected along with the current image. The border is a visual aid, showing the result of the
warped corners.
5. Repeat from step 3 for each corner, until all corners are warped in the desired position.
To reset the 4 corner adjustments, select Reset and press the OK button.
8.3.5 Warping – Bow
About bow adjustment
A bow distortion can be adjusted so that a normal image is displayed. Positive adjustments introduce more outside bow distortion.
Negative adjustments introduce more inside bow distortion.
R5906852 F80 SERIES 21/09/2017 47