4. Physical Installation
4. PHYSICAL INSTALLATION
About
This chapter describes the physical conditions and procedures required when installing the F70 projector. It also describes the
outlines and some of the considerations that should be taken in to account when designing and setting up the installation.
Each projector installation is unique, and as such the information in this chapter is only provided as a guideline. Likewise, any images
or graphical representations shown here are for illustrative purposes only.
If you require further information and assistance during the installation process, contact a quali
fi
ed projection technician or your local
support of
fi
ce for advice.
Overview
•
•
•
•
•
Mounting the projector, general considerations
•
Projector safe attachment points
•
•
•
4.1
Installation Process
Recommended Installation sequence
Item
Procedure
Read more in chapter
1
Con
fi
rm that the installation area meets all
technical and environmental requirements
To be linked to a chapter and page
2
Decide where the projector will be mounted To be linked to a chapter and page
3
Unpack the projector and con
fi
rm that all
equipment is present and in good working
order
To be linked to a chapter and page
4
Mount the projector
To be linked to a chapter and page
5
Install the projector lens
To be linked to a chapter and page
6
Connect the source
To be linked to a chapter and page
7
Power up the projector
To be linked to a chapter and page
8
Set up the image
To be linked to a chapter and page
4.2
Installation conditions
Environmental Conditions
Barco projectors are manufactured according to speci
fi
c design standards, which also include environmental
conditions. Failing to follow the terms and conditions outlined in this chapter can result in loss of product
warranty
The table below summarize the physical environments in which the projector may be safely operated or stored.
Environment
Ambient operating
temperature
Relative Humidity
Storage condition
0 -500m
+10 to +45 °C
10 –80% RH
–20 to +60 °C, 10 – 90 % RH
500 -1500m
+10 to +40 °C
10 –80% RH
–20 to +60 °C, 10 – 90 % RH
1500 - 3000m
+10 to +35°C
10 –80% RH
–20 to +60 °C, 10 – 90 % RH
Maximum Air Flow
900m
3
/hour
10 –80% RH
Not Applicable
601–426 F70 SERIES 16/06/2017
31
Summary of Contents for F70-W8
