1. F70 / F90-series multifunctional frame
Keep the following in mind:
•
It is allowed to stack
maximum three
projectors.
•
It is allowed to suspend
maximum two
projectors.
Transportation of the frame
Never transport the multifunctional frame in portrait position with a projector mounted. Failure to do so can cause damage the
multifunctional frame. Refer to image 1-1 for a bad and good example of transportation.
Image 1-1
Transportation method of the frame
This limitation only counts for transportation of a rigging frame with projector mounted. You can still install
the projector in portrait position while in the rigging frame.
1.2
Introduction
Functionality
An F70 / F90 projector mounted in the multifunctional frame makes the projector more rugged and handy.
The multifunctional frame makes it possible to stack multiple projectors. This can be useful for a dual projection 3D system. In the
multifunctional frame, the projector can be rotated around x, y and z axis in order to obtain a seamless adjustment.
Furthermore, the multifunctional frame can be used to suspend the projector from a truss. This can be done either in a upright or
upside down position.
Content of the kit
Parts to assemble rigging frame
Pieces
Bottom frame (contains projector supporting structure)
1
Top frame
1
Vertical pro
fi
le
4
Top stacking pin
4
Bottom stacking pin
4
Stacking screw
8
Set screw M6 x 6 (to secure stacking screw)
8
Orientation rod + nut M3 x 50 (used as installation tooling)
3
High strength threadlocker
1
Side bracket
1
2
R5906768 F70 / F90 MULTIFUNCTIONAL FRAME 22/11/2017
