- 5 -
Power down the projector
1.
Press and hold the power button for 3 seconds. (A timer indicator will show up on the display).
2.
The power button illumination will become white, and projector will enter the cool down modus for
approximately 5 minutes.
3.
When the backlight for the keypad is off, unplug the power cord from the projector.
3 sec
5 min
Connect and select source
1.
Connect
available sources to the appropriate input ports.
2.
Select
connected source.
(See User Guide for detailed menu navigation steps).
Input LEDs explained:
•
Select
LED (reference 1)
-
GREEN : port configured as input. Image appears on the screen.
-
Blinking GREEN : bidirectional port configured as output/loopthrough.
•
Sync
LED (reference 2)
-
YELLOW : sync/signal is present.
Sync
Select
1
2
Adjust
1.
Adjust the lens settings
by pressing the lens menu button on the keypad or via the zoom, shift and focus
buttons on the RCU.
2.
Orientation
of the unit is set as standard in table front projection mode.
Change the projector set up in the
INSTALLATION
>
ORIENTATION
menu.
3.
For
Advanced adjustments
like Warping, Light management, etc. see projector User Guide.
