R5911521 /00
F40 Dust Filter
7
Image 1-2: Applying the filter frame
Image 1-3: Microswitch versus stud alignment
3.
Ensure that the stud on the filter frame engages the micro switch in the front of the side cover.
4.
Hold the filter frame in position, and enter the screws in each corner in the corresponding threads in the side
cover. Tighten the screws in a cross pattern. Enter and tighten the two last screws
1.4 Maintenance
1.4.1 Cleaning the filter
The filter can be cleaned in two ways. Either by use of a vacuum cleaner, or by dismounting the filter and use
compressed air.
Both methods must be performed with caution.
1.4.2 Replace the filter
The dismounting of the filter unit is performed in the reverse order as the mounting process.
