3. Getting started
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
3-14
3.2.5
Graphic cards
The DDC capable UGX and AGX
G
RAPHIC
C
ARDS
provide the facility for connecting CRT monitors or projectors (analog
mode) or for connecting Barco projection modules (digital mode) to E
OS
. By means of a rotary switch on the
boards they can easily be switched between analog and digital mode.
For E
OS
systems with digital output and video or RGB insertions the output of the graphic cards is led over to
O
MNI
S
CALERS
and then connected to the display device. Please refer to section
UGX Graphic Card
The UGX
G
RAPHIC
C
ARD
provides two Dual-DVI connectors to connect four display devices. For digital output, resolu-
tions up to UXGA can be processed.
port 0/1 out
port 2/3 out
LED port 2/3
Figure 3-15
Ports of UGX
G
RAPHIC
C
ARD
AGX Graphic Card
The AGX
G
RAPHIC
C
ARD
provides one Dual-DVI connector to connect two display devices. For digital output, resolu-
tions up to SXGA can be processed.
Figure 3-16
Ports of AGX
G
RAPHIC
C
ARD
