6. Advanced Configuration
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
6-23
6.2.5
Custom configuration
If you select
Custom Configuration
when starting the system configuration script, you run through an ab-
breviated configuration. The extent of the configuration can be customized, i. e. you can decide for each parame-
ter whether it is called up by the configuration script or not.
Configuration
The default configuration for custom configuration is stored in a text file:
/etc/MMTconfig/MMTProfile
Each line contains a single keyword and its status, e. g.:
ASK_PRIMARY_HOSTNAME 1
Status
1
stands for
yes, the item is called up
during custom configuration, and status
0
stands for
no, item is
not called up
. Blank lines as well as unknown keywords are ignored.
Following table shows the standard configuration for custom configuration, as stored in
MMTProfile
:
ASK_PRIMARY_NIC_TYPE
0
Type of interface (100 Mbps, BNC, …)
ASK_X11_CURSOR
0
Size of X.11 cursor
ASK_X11_MOUSE
0
Type of X.11 mouse
ASK_X11_FONTSERVER
0
IP address and port number of font server
ASK_X11_BITPERPIXEL
0
Color depth (bit per pixel)
ASK_X11_VISUALCLASS
0
Visual class
ASK_X11_XDM
0
IP address of XDM and type of query
ASK_X11_MONITOR_TYPE
0
Type of monitor (analog/digital)
ASK_MONOLIT_SCREEN_MODE
0
Multi-head/multi-screen
ASK_MONOLIT_SCREEN_ARRANGEMENT
1
Layout of multi-screen mode
ASK_MONOLIT_MON_RESOLUTION
0
Resolution of monitor
ASK_ENGINE_NETWORK
0
IP address, net-mask, broadcast address for rendering
machine
ASK_ENGINE_ETHERADDR
1
Ethernet address for rendering machine
ASK_ENGINE_SCREEN_ARRANGEMENT
0
Multi-screen layout for rendering machine
ASK_ENGINE_NIC_TYPE
0
Type of interface of sub-net network card
ASK_MMT_SECURE_MODE
0
Secure mode
ASK_GRAPHIC_ACCELERATOR_TYPE
0
Type of graphic accelerator
ASK_MX_REFRESH_RATE
0
Refresh rate of AGX / UGX G
RAPHIC
C
ARD
Table 6-16
Please, keep in mind, that an entry set to zero does not disable the respective feature. But
its properties are not questioned during custom configuration.
This procedure must be carried out as described in section
.
