![background image](http://html.mh-extra.com/html/barco/eonis-mdrc-2122-bl/eonis-mdrc-2122-bl_user-manual_473544023.webp)
6. Maintenance
6. MAINTENANCE
General maintenance information
The Eonis display does not require any scheduled maintenance or calibration activities. We recommend
to use QAWeb with the Barco default tests and frequencies to calibrate and maintain the display or return
the display to a Barco approved maintenance organization. In any case of doubts, contact the Barco
Healthcare Division.
6.1
Cleaning instructions
To clean the display
Clean the display using a sponge, cleaning cloth or soft tissue, lightly moistened with a recognized clean-
ing product for medical equipment. Read and follow all label instructions on the cleaning product. In case
of doubt about a certain cleaning product, use plain water.
Do not use following products:
•
For WP version: alcohol/solvents at higher concentration > 70%, for all other versions; alcohol/sol-
vents at higher concentration > 5%
•
Strong alkalis lye, strong solvents
•
Acid
•
Detergents with
fl
uoride
•
Detergents with ammonia
•
Detergents with abrasives
•
Steel wool
•
Sponge with abrasives
•
Steel blades
•
Cloth with steel thread
C
AUTION
:
Take care not to damage or scratch the front glass or LCD. Be careful with
rings or other jewelry and do not apply excessive pressure on the front glass or LCD.
C
AUTION
:
For black model only: Do not apply or spray liquid directly to the display as
excess liquid may cause damage to internal electronics. Instead, apply the liquid to a
cleaning cloth.
K5903049 EONIS 11/10/2016
21