BARCO 12
Projection Systems
Passive 3-D Configuration Setup
What has to be
done
Two projectors have to be adapted with a polarizer unit, one with the polarizer unit for
Left channel and the other with the polarizer unit for Right channel. To make use of
maximum available polarizer area, an adjustment of the position with regard to the lens
front is required.
Front/Table
3D Front L
3D Front R
Front/Ceiling
3D Front L
3D Front R
Rear/Table
3D Front R
3D Front L
Rear/Ceiling
3D Front R
3D Front L
Channel
Left
Channel
Right
see table below
Projector
Configuration
Connect "Left Channel" to
projector with
mounted Polarizer:
Connect "Right Channel" to
projector with
mounted Polarizer:
Channel
connection
to be continued on next page
The following table shows which channel should be connected to which projector.
The "
Left channel
" corresponds with the image for the
left Eye
, the "
Right channel
"
corresponds with the image for the
right Eye
.
Only the connections according to the table below will result in HIGH QUALITY 3D
images.
3D Front L
3D Front R