![background image](http://html.mh-extra.com/html/barco/duet-ii/duet-ii_owners-manual_474040012.webp)
3. Connections
12
Monitor Output
13
R(emote) C(ontrol) Input
14
LCD Display
Table 3-1
3.2
Power Connection
Power Cord Connection
The power input is auto-ranging from 90 to 240 VAC. Use the supplied power cord to connect your projector to the wall outlet. Plug
the female power connector into the male connector at the rear of the Duet II.
MAINS
INPUT
COMMUNICATION
STEREO
ID BIT IDENTIFICATION
R
G
B
H/C
V
R
G
B
H/C
V
R
G
B
H/C
V
TO PROJECTOR 1
TO PROJECTOR 2
DVI OUT
DVI OUT
RS 232 IN
RS 232 OUT
to wall outlet
Image 3-2
Power Cord Connection
3.3
Switching On/Off
How to Switch the Duet II On?
1. Press the power switch to switch the BARCO Duet II On. (image 3-3)
’DUET II Interface’ will be displayed on the LCD Display. (image 3-4)
Image 3-3
Power Switch
8
R5976550 BARCO DUET II 10/05/2007