![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005138.webp)
15. Removal and installation of the projector covers
15.3 Removal of the top cover
W
ARNING
:
Switch off the projector prior to start with this procedure, unless otherwise speci
fi
ed in the pro-
cedure.
To remove the top cover from the projector the Communicator Touch Panel must be removed
fi
rst if installed
on top of the projector. This procedure assumes that the Communicator Touch Panel is not installed on top
of the projector.
Necessary tools
Flat screwdriver 7 mm
How to remove the top cover?
1. Loosen the four captive screws (reference 1 image 15-3) of the top cover using a 7 mm
fl
at screwdriver.
2. Remove the top cover from the projector.
1
Image 15-3
134
R5906847 DP2K SLP SERIES 02/06/2017
Summary of Contents for DP2K SLP Series
