![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005126.webp)
14. Maintenance procedures
14.1 Check the large dust
fi
lter
Necessary tools
7mm
fl
at screwdriver.
How to check the large dust
fi
lter?
1. Loosen the two captive screws (reference 1 image 14-1) of the large dust
fi
lter assembly using a 7mm
fl
at screwdriver.
2. Remove the dust
fi
lter assembly from the projector by pivoting the assembly away from the projector as illustrated. Note that the
other side of the assembly contains two mounting lips (reference 2 image 14-1) which are engaged in the projector chassis.
2
1
Image 14-1
3. Detach the dust
fi
lter from the cover plate. Do this by pushing the two latches (reference 3 image 14-2) of the dust
fi
lter inwards.
4.
Check
the “air in” side of the dust
fi
lter for
dust
and/or
grease
.
In case the
fi
lter is contaminated with grease wash and dry the dust
fi
lter. See cleaning procedure "Washing and drying the dust
In case the
fi
lter contains dust but doesn’t feel greasy then vacuum clean the dust
fi
lter. See procedure "Vacuum cleaning of the
Note:
Grease on the
fi
lter can build up after several months in an environment contaminated with greasy air. Note that areas
where popcorn is consumed are subject to greasy air.
Tip:
Take into account that the time needed to dry the dust
fi
lters may be 24 hours or more. For that, it’s recommended to
have a second set of dust
fi
lters which can be used while cleaning the
fi
rst set.
5. Attach a clean dust
fi
lter to the cover plate. Ensure that both latches and both mounting lips (reference 4 image 14-2) of the dust
fi
lter are engaged.
Caution:
UNDER NO CIRCUMSTANCES SHOULD WET FILTERS BE INSTALLED BACK INTO THE PROJECTOR. THIS
CAN HAVE SERIOUS SAFETY CONSEQUENCES AS WELL AS JEOPARDIZE THE INTERNAL OPTICS OF THE
SYSTEM.
3
4
3
Image 14-2
122
R5906847 DP2K SLP SERIES 02/06/2017
Summary of Contents for DP2K SLP Series
