![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005115.webp)
11. Convergence
11.5 Closing off the Light Processor compartment
Necessary tools
•
7mm
fl
at screwdriver.
•
3mm Allen wrench.
How to close off the Light Processor compartment?
1. Place the fan on top of the Light Processor in the lower position . Ensure that the four mounting pins (reference 1 image 11-11)
of the fan assembly are engaged.
Caution:
Take care of the wire.
1
Image 11-11
2. Install the top cover plate of the Light Processor compartment.
3. Install the side cover plate of the Light Processor compartment.
4. Install the top cover of the projector.
5. Install the left side cover of the projector.
6. Switch on the projector.
7. Clear the security warning. See procedure page 130.
R5906847 DP2K SLP SERIES 02/06/2017
111
Summary of Contents for DP2K SLP Series
