![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_service-manual_474006037.webp)
R5906848 /04
DP2K SLP Series
37
7
8
6
1
4
2
3
5
Image 4-7
5.
Install the new Solid State relay. The load side (pin 1 & pin 2) of the Solid State relay should be at the top.
Ensure to mount the heatsink and insulation sheet between the Solid State relay and projector chassis as
illustrated in Image 4-7. Use a 3mm Allen wrench to fasten the two screws (reference 5 Image 4-7).
6.
Connect the wires with the Solid State relay. Use a torque screw driver and apply a torque of
2.3Nm
(1.70
lbf*ft) upon the large screws (LOAD) and a torque of
1.1Nm
(0.81 lbf*ft) upon the small screws.
•
Connect the
black wire
from the LOAD side of the Mains Filter with
pin 1
of the Solid State relay
(reference 1 Image 4-7).
•
Connect the
white wire
(LPS cable) with
pin 2
of the Solid State relay (reference 2 Image 4-7)
•
Connect the
thin red wire
with
pin 3
of the Solid State relay (reference 3 Image 4-7)
•
Connect the
thin black wire
with
pin 4
of the Solid State relay (reference 4 Image 4-7)
7.
Close the Mains Input compartment and install the rear cover of the projector. See procedure
, page 33.
Summary of Contents for DP2K SLP Series
