![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_service-manual_474006207.webp)
R5906848 /04
DP2K SLP Series
207
2.
Fully loosen the Scheimpflug nut at the lower left of the Lens Holder (reference 4 Image 17-16). Use a 13mm
nut driver.
4
4
Image 17-16
3.
Turn the three Scheimpflug adjustment nuts, reference 1, 2 and 3 Image 17-17, until the front of the nut
(reference 5 Image 17-17) is equally aligned with the front of the threaded rod (reference 6 Image 17-17). Use
a 13mm nut driver.
Note:
This is the nominal position of the Lens Holder.
2
1
3
5
6
3 x
3 x
1
2
3
4
Image 17-17
4.
Zoom the lens for maximum image on the screen (
WIDE
) and focus the center of the projected image using
the motorized focus control (Local Keypad).
F
FOCUS
Image 17-18
5.
Is it possible to focus the center of the projected image using the motorized focus control (Local Keypad) ?
Ensure that the lens is zoomed for maximum image on the screen (
WIDE
).
►
If yes,
nominal position is good for sharp focus in the middle of the projected image. Proceed with step 6.
►
If no,
obtain the best possible focus in the center of the projected image using the motorized focus control
and then turn the three Scheimpflug adjustment nuts, reference 1, 2 and 3 Image 17-19, equally in or out until
the center of the projected image is sharp.
Attention:
Keep in mind the turning direction of the Scheimpflug
adjustment nuts for further adjustment instructions in this procedure.
Summary of Contents for DP2K SLP Series
