![background image](http://html1.mh-extra.com/html/barco/dp2k-series/dp2k-series_user-manual_474003168.webp)
5. Installation
5.9.4.3 Create a Basic clone
fi
le
What can be done ?
All presets (macros) that are linked to a button and the
fi
les these presets are pointing to, together with its
position on the keypad and/or touch panel are copied in a zip
fi
le. By default, projector speci
fi
c
fi
les are
not included in the zip
fi
le. These
fi
les can be included if desired so that a restore on the same projector
is possible.
How to make a basic clone
1. Check the radio button next to
Create a clone
fi
le from the projector
and tip on
Next>
2. Check the radio button next to
Preset clone
and tip on
Next>
.
The software gathers all presets, the pointed
fi
les and the locations and display it for con
fi
rmation.
By default, setup speci
fi
c
fi
les will not be included in the clone
fi
le.
3. Do yo want to include setup speci
fi
c
fi
les?
If yes, Check the check box in front of
Clone setup speci
fi
c settings
and tip then on
Next>
.
A message is displayed. Sharing MCGD and SCREEN data is not recommended. Use it only for
backup purposes. (image 5-43, image 5-44)
If no, click immediately on
Next>
without checking the check box. (image 5-45)
In both cases, data will be retrieved and an overview is given from what is included.
The state:
- included : data is include in the clone
fi
le.
- not included : a pointer to the
fi
le is included but no data.
4. A default
fi
le name is given. To change this name, click
Change
(4). (image 5-46)
The
fi
le selection and location window opens. A default
fi
le name is already
fi
lled out (5).
5. Tip on the storage location at the left side (6a)
- Touch panel (
- USB Storage
Or,
tip on the drop down box and select the storage location (6b).
6. If you want to change the
fi
le name, tip on it, select the
fi
le name and enter a new name with the
keyboard.
7. Tip
OK
to accept the selected location and
fi
le name (7).
8. If you want to enter extra command, tip in the command
fi
eld and enter the command with the keyboard
(9).
9. Tip
Create clone
fi
le >
(10).
The clone
fi
le is created and stored on the selected location.
164
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
Summary of Contents for DP2K Series
