![background image](http://html1.mh-extra.com/html/barco/dp2k-series/dp2k-series_user-manual_474003125.webp)
5. Installation
Image 5-2
Assign IP address via DHCP
When DHCP is enabled and the projector does not
fi
nd a DHCP server on the network,
or the projector is not connected to a network, than the projector will be in a fail state.
The hardware Fail LED on the interface board will be on. The status (Status tab) will
indicate ’Ethernet Not OK’
5.1.5
Manually assign an Ethernet address
How to set up
1. While in
Communication
, tip
Edit
(1) button under
Projector IP address
The
Edit the Barco IP address
window opens (2).
2. Check the check box next to
Use the following IP address
(3).
3. Tip in the input
fi
eld of the
IP address
and
fi
ll out the 4
fi
elds.
Note:
An address contains 4 octets with a maximum value of 255.
This must NOT be 0.0.0.0 for static IP-Address assignment
4. Tip in the
Subnet mask
input
fi
elds and
fi
ll out the 4
fi
elds as appropriate for the local subnet.
5. Tip in the
Default Gateway
input
fi
elds and
fi
ll out the 4
fi
elds. Set the Default-Gateway to the IP-Address
of the router (MUST be on the local subnet!).
Note:
This must NOT be 0.0.0.0.
If there is no router on the projector’s local subnet then just set this
fi
eld to any IP-Address on
the subnet.
6. Tip
Apply
to activate (4).
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
121
Summary of Contents for DP2K Series
