![background image](http://html1.mh-extra.com/html/barco/dp2k-s-series/dp2k-s-series_user-and-installation-manual_4093724125.webp)
15. Removal and installation of the projector covers
15.4 Removal of the left side cover
W
ARNING
:
Switch off the projector prior to start with this procedure, unless otherwise speci
fi
ed in the pro-
cedure.
Necessary tools
7mm
fl
at screwdriver.
How to remove the left side cover?
1. Release the small dust
fi
lter assembly from the front side of the projector. Use 7mm
fl
at screw driver to loosen the captive screw
(reference 1 image 15-4) of the small dust
fi
lter assembly.
Note:
The left side cover is partial captured by the sheet metal of the small
fi
lter assembly. For that, this
fi
lter has to be (partially)
removed
fi
rst.
1
Image 15-4
2. Loosen the
fi
ve captive screws (reference 2 image 15-5) of the left side cover using a 7mm
fl
at screwdriver.
3. Remove the left side cover from the projector.
2
1
Image 15-5
R5977692 DP2K-S SERIES 10/12/2012
121
Summary of Contents for DP2K-S Series
