![background image](http://html1.mh-extra.com/html/barco/dp2k-36blp/dp2k-36blp_user-and-installation-manual_4104727082.webp)
7. Lenses & lens holder
11
21
11
Image 7-37
5. Gently turn (by hand) the Scheimp
fl
ug adjustment nut at the lower left of the Lens Holder (reference 4 image 7-38) against the
Lens Holder front plate without disturbing the projected image.
6. Turn in the set screw at the lower left of the Lens Holder (reference 14 image 7-38) without disturbing the projected image. Use
a 3mm Allen wrench.
Note:
Ensure that the edges of the projected test pattern remain in place on the screen. Any movement of the image will affect
the Scheimp
fl
ug adjustment.
Tip:
Fasten the set screw and the Scheimp
fl
ug nut alternately, without disturbing the projected image, until the Scheimp
fl
ug
nut and set screw are completely tightened.
4
14
24
Image 7-38
7. Fasten the lock nut at the lower left of the Lens Holder. Use a 10mm nut driver.
78
R5906753 DPXK BLP SERIES 20/11/2017
Summary of Contents for DP2K-36BLP
