![background image](http://html1.mh-extra.com/html/barco/dp2k-36blp/dp2k-36blp_user-and-installation-manual_4104727076.webp)
7. Lenses & lens holder
11
11
21
Image 7-22
2. Fully loosen the Scheimp
fl
ug nut at the lower left of the Lens Holder (reference 4 image 7-23). Use a 13mm nut driver.
4
4
Image 7-23
3. Turn the three Scheimp
fl
ug adjustment nuts, reference 1, 2 and 3 image 7-24, until the front of the nut (reference 5 image 7-24)
is equally aligned with the front of the threaded rod (reference 6 image 7-24). Use a 13mm nut driver.
Note:
This is the nominal position of the Lens Holder.
Caution:
Do not remove any of the Scheimp
fl
ug adjustment nuts completely from the threaded rod. Otherwise the lens holder
front plate with lens will fall off.
1
4
2
5
6
3 x
3 x
1 2 3
3
Image 7-24
4. Zoom the lens for maximum image on the screen (
WIDE
) and focus the center of the projected image using the motorized focus
control (Local Keypad).
72
R5906753 DPXK BLP SERIES 20/11/2017
Summary of Contents for DP2K-36BLP
