![background image](http://html1.mh-extra.com/html/barco/dp2k-19b/dp2k-19b_installation-manual_4105057101.webp)
11. Maintenance
11. MAINTENANCE
About this chapter
This chapter describes how to remove the dust
fi
lters
Overview
•
Remove and clean the front dust
•
Remove and clean both bottom dust
•
•
Cleaning the exterior of the projector
•
•
•
Authorization to clear security warning on the projector
The air
fi
lters should be cleaned monthly under normal environment conditions. Equipment in very dusty or
otherwise contaminated areas may require more frequent maintenance.
If the air
fi
lters are not regularly cleaned, the air
fl
ow inside the projector could be disrupted and cause over-
heating. Overheating may lead to the projector shutting down during operation.
11.1 Remove and clean the front dust
fi
lter
How to remove
1. Remove the input cover.
2. Slide out the
fi
lter frame.
R5905067 DPXK-19B/23B/P 17/09/2012
95
Summary of Contents for DP2K-19B
