![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263097.webp)
12. Convergence
1
Image 12-6
Clockwise turning will move line downwards.
2. Slightly turn the red colored control knob number 2 until the red pattern in the lower left of the projected image converges with
the blue pattern.
2
5
Image 12-7
Clockwise turning will move line upwards.
3. Slightly turn the red colored control knob number 3 until the red pattern in the upper right of the projected image converges with
the blue pattern.
3
6
Image 12-8
Clockwise turning will move line upwards.
4. Repeat step 2 and step 3 until coincidence is obtained of the red pattern in the lower left and upper right of the projected image.
5. Repeat from step 1 until full coincidence is obtained of the red pattern in the center, lower left and upper right of the projected
image.
12.4 Green on Blue convergence
This procedure can only be executed when all preparations are taken to converge the image. See "Preparing
the convergence adjustment", page 89.
R5905050 DP2K C-SERIES 10/07/2012
91
Summary of Contents for DP2K-12C
