![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263077.webp)
10. Removal and installation of projector covers
How to remove the rear cover from the projector?
1. Release the two captive screws at the bottom corners of the rear cover, using a
fl
at screw driver.
Image 10-9
Release rear cover
2. Remove the rear cover of the projector doing the following:
a) gently pull out the top corners of the rear cover,
b) then move the rear cover away from the projector.
A
A
B
Image 10-10
Remove rear cover
10.6 Removal of the top cover
W
ARNING
:
This procedure may only be performed by quali
fi
ed technical service personnel.
All side covers, front cover and back cover have to be removed before removing the top cover.
Necessary tools
Allen key 3 mm
How to remove the top cover of the projector?
1. After all side covers, front and back cover are removed, turn all 3
fi
xation screws.
R5905050 DP2K C-SERIES 10/07/2012
71
Summary of Contents for DP2K-12C
