![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263076.webp)
10. Removal and installation of projector covers
A
B
C
Image 10-6
Remove front cover
10.4 Removal of the side cover
Necessary tools
Flat screw driver.
How to remove the side cover of the projector?
1. Release the captive screw at the middle bottom of the side cover, using a
fl
at screw driver.
Image 10-7
2. Remove the side cover from the projector doing the following:
a) gently pull out the bottom corners (A) of the side cover,
b) then gently pull out the top corners (B) of the side cover,
c) then move the side cover away from the projector (C).
B
B
A
A
C
Image 10-8
10.5 Removal of the rear cover
W
ARNING
:
This procedure may only be performed by quali
fi
ed technical service personnel.
Necessary tools
Flat screwdriver.
70
R5905050 DP2K C-SERIES 10/07/2012
Summary of Contents for DP2K-12C
