![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263015.webp)
2. General
Image 2-1
2. Remove the smaller carton box (reference 1) as illustrated.
Note:
The smaller carton box contains the manual.
1
2
3
Image 2-2
3. Remove the carton box and the foam around the projector. See image 2-2.
Note:
The projector is still attached to a wooden plate, which is secured to the below pallet.
4. Loosen the four nuts (reference 2 image 2-2) which secure the pallet as illustrated. Use a 13 mm open end wrench.
5. Rotate the wooden support plate with projector 90° and slide the front side over the edge of the pallet until the
fi
xation screw
(reference 4) is visible as illustrated.
6. Remove the hexagon socket head cap screw (reference 4). Use an 8 mm Allen wrench.
90°
4
Image 2-3
7. Slide the rear side over the edge of the pallet unit the two
fi
xation screws (reference 5) at the rear are visible.
8. Remove the two hexagon socket head cap screw (reference 5). Use an 8 mm Allen wrench.
R5905050 DP2K C-SERIES 10/07/2012
9
Summary of Contents for DP2K-12C
