![background image](http://html1.mh-extra.com/html/barco/dp-1200/dp-1200_installation-manual_473995090.webp)
10. Removal and installation of projector covers
10.1 Removal of the lamp cover
W
ARNING
:
This procedure may only be performed by quali
fi
ed technical service personnel.
Necessary tools
7 mm
fl
at screw driver.
How to remove the lamp cover of the projector?
1. Release the two captive screws at the top and bottom right side of the lamp cover, using a
fl
at screw driver.
Image 10-1
2. Remove the lamp cover from the projector doing the following:
a) gently pull out the left bottom corner (A) of the lamp cover,
b) then gently pull out the left top corner (B) of the lamp cover,
c) then move the lamp cover away from the projector (C).
B
A
C
Image 10-2
86
R59770242 DP-1200 06/01/2009
Summary of Contents for DP-1200
