Barco DP-1200, Installation Manual

Page: 63 / 134

6. Input & communication unit
6.2 Local Keypad of the DP-1200 projector
Identi fi cation of the keys
C
F
G
H
B A D E
Image 6-2
A Numeric keyboard.
B Marker area for macro name.
C Standby/Operation switch.
D Dowser Open/Close switch.
E
Test Pattern toggle switch.
F Lens holder shift left/right & up/down keys.
G Lens focus keys.
H Lens zoom keys.
Numeric keys : All the numeric keys (A) of the local keypad have a blue backlight during normal operation. Only when the autho-
rization process is activated with the security key, then the backlight color of the numeric keys 1 to 10 changes to orange. Each key
can be linked to a macro which allows you to setup the projector to your requirements with one push on a button. Note that each
numeric key has a marker area (B) where you can write down the name of the macro.
Standby key : Standby key (C) switches ON or OFF the lamp and lamp electronics. The lamp cooling fans remain active for about 5
minutes. The speed of the other fans is reduced. The backlight color of the standby key remains red in standby mode and changes
to green in operation mode.
Dowser key : The dowser key (D) opens or closes the dowser. The backlight color of the dowser key is green when the dowser is
open and red when the dowser is closed.
Pattern key : The pattern key (E) gives you direct access key to the internal test patterns of the projector.
Shift keys : The shift keys (F) allows you to shift the lens up/down or left/right. This functionality is only available in case of a
motorized lens shift
Focus keys : The focus keys (G) allows you to focus the projected image on the screen. This functionality is only available in case
of a motorized lens and lens holder.
Zoom keys : The zoom keys (H) allows you to zoom in or out the projected image on the screen. This functionality is only available
in case of a motorized lens and lens holder.
R59770242 DP-1200 06/01/2009 59