manualshive.com logo in svg

Barco DATA 708, Owner'S Manual

Share
Download
Barco DATA 708 Owner'S Manual Download Page 31

Random Access Adjustment Mode

6-5

5975977 BARCODATA 708 260597

Select with        or

then <ENTER>

<EXIT> to return.

RANDOM ACCESS

ADJUSTMENT MODE

PICTURE TUNING

GEOMETRY

CONVERGENCE

COLOR SELECT

Geometry Adjustments

The geometry adjustments  have to be done only on the green image.  These adjustments are automatically implemented for the other color
images : Left-right (EW) and Top-Bottom Corrections, Blanking, Horizontal Amplitude, Vertical Amplitude, Vertical Linearity and Horizontal
Phase.

Highlight 

GEOMETRY by pushing the control disk up or down and

press 

ENTER to display the geometry menu.

Select with        or

then <ENTER>

<EXIT> to return.

GEOMETRY

H PHASE

RASTER SHIFT

LEFT-RIGHT (E-W)

TOP-BOTTOM (N-S)

SIZE

V LINEARITY

BLANKING

ENTER will display Geometry menu.
EXIT will return to Internal Crosshatch Selection or Setup
Pattern Selection Menu.
ADJUST returns to operational mode.

Within the Geometry Adjustment menu, the following adjustments
are available :

- Horizontal Phase (not for internal # pattern).
- Raster Shift
- Left-Right Corrections
- Top-Bottom Corrections
- Horizontal Size
- Vertical Linearity
- Vertical Size
- Blanking

The convergence corrections are disabled during geometry correc-
tions.  The blanking corrections are only enabled during the blanking
adjustments.

Horizontal Phase Adjustment

Push the control disk up or down to highlight 

H PHASE on Geometry

menu and then press ENTER.

Note : No horizontal phase adjustment is available on the internal #
pattern.

For external sources :
If the raster shift is correctly adjusted, the H Phase text box is
projected in the middle of the raster.  At that moment, the "><" icon
indicates the middle of the raster.
Adjust the H Phase control until the middle of the projected image is
equal with the middle of >< icon.

Note  :

- If the genlocked pattern was selected, the external source will be

displayed.

A bar scale and a number indicator (between 0 and 100) on the
screen give a visual indication of the horizontal phase adjustment.

H PHASE

><

70

H PHASE

70

><

Select with        or

then <ENTER>

<EXIT> to return.

GEOMETRY

H PHASE

RASTER SHIFT

LEFT-RIGHT (E-W)

TOP-BOTTOM (N-S)

SIZE

V LINEARITY

BLANKING

H PHASE

><

70

ENTER continues to geometry menu .

Push the control disk to
the right  to correct

Push the control disk to
the left  to correct

Summary of Contents for DATA 708


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands