![background image](http://html1.mh-extra.com/html/barco/cx-50-gen2/cx-50-gen2_installation-manual_3868346081.webp)
81
R5900120 /01
CX-50 Gen2
Image 6–16 Quality score
•
Green: >68
•
Orange: 35 – 68
•
Red: 0 – 34
Source (camera to Base Unit) is requested frame rate. This frame rate results in a destination frame rate
between Base Unit and app or Button.
6.10 Wi-Fi settings
WARNING:
It is not allowed to operate the Base Unit outside its intended geographical region.
About Wi-Fi
A connection with the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to
establish the connection.
An overview of the current settings is given when
Wi-Fi Settings
is selected and
Access Point
is enabled.
Image 6–17 Wi-Fi settings
The Access Point Settings and the Wireless Client settings can be enabled or disabled after clicking
Edit
settings
.
Check the check box next to
Enable
.
Checked
: access point settings are enabled. All current settings can be changed.
Unchecked
: access point settings are disabled.
Summary of Contents for CX-50 Gen2
