Barco Coronis 21-inch Installation & user manua, Installation And User Manual

Page: 25 / 119

Parts, controls and connectors
25
Parts, controls and connectors
Front
Figure 1: Front side
1.
Power LED
The LED is
off
when the display is disconnected from the power.
The LED is also off when the LED function is disabled in the on-
screen display (OSD).
The LED is
green
when the display is on (when enabled in the on-
screen menus).
The LED is
orange
when the display is in Stand-by power-saving
mode.
2.
USB downstream port. See also item “7.” on page 26
3.
Control wheel
The control wheel can be pressed like a push button and rotated
like a knob.
It allows to put the display in stand-by, navigate through the on-
screen display (OSD) menus and change values in the OSD.
BARCO
c
d
e