![background image](http://html.mh-extra.com/html/barco/clm-w6/clm-w6_user-manual_473964024.webp)
24
CLM W6
3. Installation
3.2 Powering On/Off the Projector
Ensure that the power cord and signal cable are securely connected.
Power on the switch
and the Power LED is solid blue.
Turn on the lamp by pressing “I” on the remote control or “ ” on the
control panel. The Power LED fl ashes green.
The startup screen displays in approximately 10 seconds.
Turn on your source. Select an input source on the remote control
(HDMI 1, HDMI 2, VGA 1, VGA 2, RGB, YUV, Video or S-Video).
The projector detects the source you selected and displays the image.
1.
2.
3.
Note: The fi rst time you use the projector, you can select your preferred lan-
guage from the main menu after the startup screen displays.
S-VIDEO
DC12V
VIDEO
Y
Pb
Pr
R/Pr
G/Y
B/Pb
H
V
HDMI 1
HDMI 2
AC MAINS POWER
MONITOR
VGA 1
VGA 2
RS232
10/100
BASE-T
ASPECT
RATIO
MENU
ZOOM
FOCUS
YPbPr
RGB
HDMI 2
HDMI 1
SHIFT
S-VIDEO
VIDEO
AUTO
PIP
ENTER
IMAGE
TEXT
VGA 2
VGA 1
PAUSE
STBY
POWER
LAMP-1
LAMP-2
TEMPERROR
Power LED
or
Power Switch
Power button
3.2.1 Powering On the Projector