![background image](http://html1.mh-extra.com/html/barco/clm-r10-r90501001/clm-r10-r90501001_user-manual_4039698085.webp)
9. Image menu
3. Use the
▲
or
▼
key to select
Image settings
and press
ENTER
.
4. Use the
▲
or
▼
key to select
Color temperature
and press
ENTER
.
5. Use the
▲
or
▼
key to select
Custom balance
and press
►
.
The Gain adjustment bar scales are displayed.
6. Adjust gain red with
◄
or
►
key and gain blue with
▲
or
▼
key. Adjust gain blue in the same way as gain red.
7. When gain adjustment is
fi
nished press
ENTER
. (image 9-36, image 9-37, image 9-38, image 9-39, image 9-40)
Image 9-36
Image 9-37
Image 9-38
Image 9-39
Image 9-40
9.3.9
Input balance
Overview
•
•
9.3.9.1
Introduction to Input Balance
Introduction: Unbalanced color signals
When transporting signals, there is always a risk of deterioration of the information contained in the signals.
In case of information contained in the amplitude of the signals which is the case of data color signals (R, G, B),image 9-41 , we are
quite sure that the amplitude of these color signals is subject to alterations.
An example of alteration may be a DC component added to the signal, in the form of a DC offset repositioning the black level, since
this
black level
(
“brightness”
) will become crucial later on (clamping circuit) it will result in “black not being black”.
Another value that is subject to alteration is the amplitude of the signal, resulting in an altered “Gain” of the signal (
“white level”
or
contrast
).
The alterations of the three color signals will happen independently i.e. the colors will end to be unbalanced, image 9-42
R59770021 CLM R10+ 11/10/2010
81
Summary of Contents for CLM R10+ R90501001
