![background image](http://html1.mh-extra.com/html/barco/clm-r10-r9050100/clm-r10-r9050100_user-manual_473961148.webp)
13. Projector control
2. Use the
▲
or
▼
key to select
Projector control
and press
ENTER
.
3. Use the
▲
or
▼
key to select
Network
and press
ENTER
.
The Ethernet menu opens.
4. Use the
▲
or
▼
key to select
Subnet mask
and press
ENTER
to select.
Note:
An address contains 4 octets with a maximum value of 255.
Fill out the 4
fi
elds as appropriate for the local subnet.
5. Use the
▲
or
▼
key to select the desired digit and press
◄
or
►
key to select the next digit in the address.
Or,
enter the value with the digit keys on the remote control or local keypad. The next digit in the address will be selected automati-
cally.
6. Press
EXIT
to return.
Image 13-25
Image 13-26
Image 13-27
Image 13-28
13.4.5 Default Gateway set up
How to set up?
1. Press
MENU
to activate the menus.
2. Use the
▲
or
▼
key to select
Projector control
and press
ENTER
.
3. Use the
▲
or
▼
key to select
Network
and press
ENTER
.
The Ethernet menu opens.
4. Use the
▲
or
▼
key to select
Default Gateway
and press
ENTER
to select.
Note:
An address contains 4 octets with a maximum value of 255.
Set the default gateway to the IP-address of the router (MUST be on the local subnet!). If there is no router on the projector’s
local subnet then just set this
fi
eld to any IP-address on the subnet.
5. Use the
▲
or
▼
key to select the desired digit and press
◄
or
►
key to select the next digit in the address.
Or,
enter the value with the digit keys on the remote control or local keypad. The next digit in the address will be selected automati-
cally.
Note:
This must NOT be 0.0.0.0
144
R59770021 CLM R10+ 15/03/2010
Summary of Contents for CLM R10+ R9050100
