![background image](http://html1.mh-extra.com/html/barco/clm-hd8/clm-hd8_user-manual_473954084.webp)
9. Image menu
An alternative to a full screen White/black pattern is the standard gray scale pattern, the white bar will be used
for white balance and the black bar for black balance.
Image 9-45
Black balance
1. Press
MENU
to activate the menus.
2. Use the
▲
or
▼
key to select
Image
and press
ENTER
.
3. Use the
▲
or
▼
key to select
Image settings
and press
ENTER
.
4. Use the
▲
or
▼
key to select
Input balance
and press
ENTER
.
5. Do you want to use an internally generated test pattern ?
If yes, Use the
▲
or
▼
key to select
Test pattern
and press
ENTER
to toggle between [on] and [off]
If no, Adjust on the selected source.
6. Use the
▲
or
▼
key to select
Black balance
and press
ENTER
.
Depending whether a test pattern is selected or not, the adjustment image is displayed.
7. Toggle with
▲
or
▼
key to select
Black balance red
.
Image 9-46
Image 9-47
Image 9-48
Image 9-49
Image 9-50
8. Adjust the red black level on a minimal value
9. Toggle with
▲
or
▼
key to
Black balance blue
and adjust the blue black level on a minimal value.
Note:
This minimal value is not necessary , provided that the 2 other colors are not in
fl
uencing too much the color to be adjusted,
in fact the aim is to minimize the effect of the two other colors since there is a risk of reaching too soon the 50% transition
due to the contribution of these two other colors signals.
10.Toggle with
▲
or
▼
key to
Black balance green
and adjust the Green black level until bright spots appear on the screen.
11.Toggle with
▲
or
▼
key to
Black balance blue
adjust the Blue black level until bright spots appear on the screen.
12.Toggle with
▲
or
▼
key to
Black balance red
adjust the Red black level until bright spots appear on the screen.
80
R59770057 CLM HD8 15/03/2010
Summary of Contents for CLM HD8
