![background image](http://html1.mh-extra.com/html/barco/clm-hd8/clm-hd8_user-manual_473954017.webp)
2. General
Image 2-2
5. Remove the foam rubber.
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
A rubber foam inside a plastic bag is placed into the lens opening of the projector. It’s recommended to reuse
this foam and plastic back each time you transport the projector. This to prevent intrusion of dust and foreign
particles.
C
AUTION
:
Always remove the lens before transporting the projector !
2.3
Box content
Content
•
One Barco CLM HD8, weight ±31 kg (±68 lb.).
•
One Remote Control Unit (RCU).
•
Two AA size batteries for the RCU.
•
Two power cord of 2.5 meter, one CEEC19 and one NEM6C19.
•
One user manual.
•
One safety manual.
Initial inspection
Before shipment, the projector was inspected and found to be free of mechanical and electrical defects. As soon as the projector is
unpacked, inspect for any damage that may have occurred in transit. Save all packing material until the inspection is completed. If
damaged is found,
fi
le claim with carrier immediately. The Barco sales and service of
fi
ce should be noti
fi
ed as soon as possible.
The packaging of the CLM HD8 is provided with a shock-watch label. If this shock-watch label was triggered
(red colored at arrival) during transport, that indicates the package was possibly roughly handled by the trans-
port company. In this case, the instructions mentioned on the label, should be followed, which are: adding a
note on the transportation document and informing the transport company and the Barco sales and service
of
fi
ce as soon as possible.
Mechanical check
This check should con
fi
rm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and
scratches, and that the operating panel are not scratched of cracked. The Barco sales and service of
fi
ce should be noti
fi
ed as soon
as possible.
R59770057 CLM HD8 15/03/2010
13
Summary of Contents for CLM HD8
