Barco CLM HD8 User Manual Download Page 148

Page: 148 / 231

13. Projector control

Image 13-36

Image 13-37

13.6 DMX

Overview

•

•

•

•

•

While the local LCD display on the CLM is active (backlight is on), the DMX response time may increase.

13.6.1 DMX address

How to set the DMX address

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Projector control

and press

ENTER

3. Use the

▲

▼

key to select

DMX

and press

ENTER

4. Use the

▲

▼

key to select

DMX address

and press

ENTER

The edit DMX address window opens.

5. Use the

▲

▼

key to select a new value

Or,
enter a new value with the digit keys on the remote control or local keypad.

6. Use the

◄

►

key to select the next digit and repeat step 5.

7. When the desired address is entered, press

ENTER

to store that address.

Image 13-38

Image 13-39

Image 13-40

144

R59770057 CLM HD8 15/03/2010

Summary of Contents for CLM HD8








































































































































































































































Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands

Barco CLM HD8, User Manual

Search results

Summary of Contents for CLM HD8

Reviews:

Related manuals for CLM HD8

Brands by name

Popular brands