![background image](http://html1.mh-extra.com/html/barco/clickshare-cs-100/clickshare-cs-100_installation-manual_473945066.webp)
R5900022 /18
ClickShare CS-100 series
66
Screen saver setup
1.
Log in to the
Configurator
.
2.
Click
Display & Audio
→
Display & Audio
.
Image 6–15 Display settings
3.
To activate the screen saver, drag the slider bar to the left or to the right until the desired delay time is
reached.
When the slider is set completely to the right, the screen saver will never be activated.
6.9 Audio settings
About the audio settings
The audio functionality can be disabled or enabled. When the enable and/or disable setting is changed, the
Buttons must be re-paired before the setting becomes active.
Image 6–16 Audio settings
Audio disabling or enabling will require a repairing of the Buttons used with this Base Unit.
Summary of Contents for ClickShare CS-100
