Barco CineVERSUM 110, Owner'S Manual

Page: 118 / 153

13. Display Setup
13.2 Startup screen
What can be done ?
When the startup screen is enabled, the identification screen is displayed for a few seconds at startup.
This startup screen can be disabled.
How to enable/disable the Startup screen?
1. Press MENU to activate the menu bar.
2. Press → to select the
Display setup
item. (image 13-2)
3. Press ↓ to pull down the
Display setup
menu.
4. Use ↑ or ↓ to select
Startup screen.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to select
On
or
Off
.
On Start up screen will be displayed.
Off No start up screen will be displayed during start up.
7. Press ENTER to confirm.
Image 13-2
13.3 TextBox
What can be done ?
All menus, dialog boxes and text boxes can be disabled by putting the text box function in the off position.
How to enable/disable the Textbox ?
1. Press MENU to activate the menu bar.
2. Press → to select the
Display setup
item. (image 13-3)
3. Press ↓ to pull down the
Display setup
menu.
4. Use ↑ or ↓ to select
Textbox
.
5. Press → to pull down the menu.
6. Use ↓ or ↑ to enable/disable the textbox.
7. Press ENTER .
114 R5976697 CINEVERSUM™ 110 12/05/2004