Barco CINE7 R9010040, Owner'S Manual

Page: 47 / 115

6. Main Menu
Selecting the sound control.
1. Push the cursor key
↑
or
↓
to select Sound Control . (menu 6-27)
2. Press ENTER to select the Sound Control function.
The Sound Control menu will be displayed. (menu 6-28)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-27
SOUND CONTROL
Select sound mode :
Normal Stereo
Spacial Stereo
Pseudo Stereo
Mono
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-28
6.5 Function Keys
What can be done?
Quick access keys to customer pre-programmed adjustments. Almost any adjustment can be added to a function key. To program
a function key, it is necessary to enter into the ’Service Menu’. To activate a function key, just press the corresponding key.
The following functions are factory pre-programmed :
• F1 = IRIS Touch up
• F2 = Convergence Red on Green
• F3 = Convergence Blue on Green
• F4 = H & V Size
• F5 = Color Balance
To get an overview of the programmed keys
1. Push the cursor key
↑
or
↓
to select Function Keys . (menu 6-29)
2. Press ENTER to display an overview of the function keys. (menu 6-30)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-29
FUNCTION KEYS
F1: IRIS Touch-up
F2: Covergence Red on Green
F3: Convergence Blue on Green
F4: H & V Size
F5: Color Balance
<EXIT> to return
Menu 6-30
6.6 Service Menus
What can be done?
With the complete set of Service menus such as IRIS, Guided, Random Access, Installation and Service it is possible to adjust the
projector completely.
When entering the Service Menus, a warning will be displayed mentioning that only qualified service personnel may enter the Service
menus.
R5976584 BARCO CINE7 26022003 43