11. Messages, Warnings and Failures
11. MESSAGES, WARNINGS AND FAILURES
Overview
•
•
•
11.1 Messages
Messages
INPUT 01 RGB2 Fh=064kHz Fv=060Hz
When selecting a new source, following information about this source
will be displayed on the screen: Source number, horizontal and
vertical frequencies of the displayed source.
SOURCE 01 RGB2
Announcement of the selected source.
enter password XXXX
Message to enter your password, password contains 4 digits.
WRONG PASSWORD !!!
Message when the entered password is wrong
TEXT on SOURCE 01 RGB2 xxxkHz xxHz
These messages will be displayed on the screen when pushing the
TEXT key.
TEXT On
TEXT On: the ’bar scale indication’ will be enabled during the change
of an analog control in the ’operational mode’ + all warnings and
failures will be displayed.
TEXT Off
Text OF: the ’bar scale indication’ will be disabled during the change
of an analog control in the ’operational mode’ + all warnings and
failures will not be displayed.
PROJECTOR ADDRESS: 003
Indication of the projector address when activating the ’ADDRESS’
button on the RCU with a pencil or other small object.
11.2 Warnings
Warnings
WARNING: Input not available
When using the projector with the RCVDS, this warning will be displayed when
selecting an input slot of an RCVDS where the input board is missing.
WARNING: Source not available
The input is a valid input but the source is not connected to the input terminals or
the input source is switched off.
WARNING: Invalid key intro
When a wrong key is pressed on the RCU.
WARNING: End of adjust range
End of adjustment range.
WARNING: Input no longer available
The input source is no longer available.
WARNING: RCVDS not available
The input source selector is not available.
WARNING: invalid frequency input
The entered frequency or applied frequency of the source is out of the projector’s
range.
WARNING: Option not installed !
Option not installed. e.g. Video selected but no decoder installed.
R5976584 BARCO CINE7 26022003
101
Summary of Contents for CINE7 R9010040
