Barco CINE7 R9010040, Installation Manual

Page: 28 / 35

5. Installation Adjustment
Image 5-4
Electrical focus adjustment
The blue focus has been factory adjusted for optimal color reproduction. Readjustment of the blue focus will
effect color temperature and color tracking.
5.8 Raster Centering
Introduction
The raster must be centered on the CRT faceplate of each tube, therefore, it is necessary to look into the lenses. Following screen
will be displayed:
RASTER CENTERING
CONTRAST LEVEL IS REDUCED
AND BRIGHTNESS INCREASED
TO MAKE THE RASTER VISIBLE
ON THE FACE PLATE OF EACH
CRT
USE THE ARROW KEYS TO
CENTER THE RASTER ON THE
GREEN, RED AND BLUE CRT
RESPECTIVELY
<ENTER> to continue
<EXIT> to return
Menu 5-10
To avoid eye discomfort while performing these adjustments, reduce the contrast setting and gradually in-
crease the brightness level until the raster becomes visible behind the image.
In order to ensure maximum CRT longevity and to avoid CRT damage, do not shift the raster outside the
phosphor area or the CRT.
CRT Phosphor Width
Following phosphor width is used for the green color:
24 R5976585 BARCO CINE7 26022003