OVERVIEW OF USER’S CONTROLS
2.3 Remote Control Operation
Overview
•
General
•
Battery Insertion in the remote control
•
Visualization of Commands
2.3.1 General
How to use
This remote control includes a battery powered infrared transmitter which allows the user to control the projector remotely via its own
built-in infrared receiver.
When operating the remote control unit, point it at any of the remote sensors, located on the front, front top, and rear of the projector.
The remote control unit is operable up to 9 meters from the unit and within a 45-degree angle on each side of the sensor (image 2-3).
The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may
differ due to the screen material.
Image 2-3
Remote control operating range
Backlighting
When a button on the remote control is pressed, backlight is activated automatically. That allows the user to operate the remote control
in a dark room. Backlight is turned off automatically a few seconds after the last key activation.
If the backlight and remote control operation indicator light up too long or continuously, the batteries
need to be replaced.
R5976691 CINE VERSUM 70/60 24112003
7
