Barco C5011S Installation Manual Download

Page: 138 / 158

R5900120 /03

ClickShare CX-50 Gen2

138

5.38 Blackboard

About Blackboard

Saving information from a blackboard can be enabled or disabled. When enabled, the information is saved on

hard disk of all connected Buttons, connected ClickShare apps and on the USB sticks connected with the

Base Unit.

How to change the blackboard setting

Configurator

Click

System

→

Blackboard

Image 5–58 Save annotations

To enable or disable Blackboarding check or uncheck the checkbox in front of enable or disable.
Checked: blackboarding enabled
Unchecked: blackboarding disabled.

Check or uncheck the check box in front of

Allow saving annotations to connected clients and USB sticks

Checked: annotations on the blackboard can be saved.
Unchecked: no annotations on the blackboard can be saved.

CX-50 Gen2 Configurator

Summary of Contents for C5011S































































































































































Search results

Summary of Contents for C5011S

Reviews:

Related manuals for C5011S

Brands by name

Popular brands

Barco C5011S, Installation Manual

Search results

Summary of Contents for C5011S

Reviews:

Related manuals for C5011S

Brands by name

Popular brands