Barco C5011S, Installation Manual

Page: 117 / 158

117 R5900120 /03 ClickShare CX-50 Gen2
5.22 Service, mobile devices
ClickShare app
This function enables the possibility to connect with a mobile device using the ClickShare app to connect to
the Base Unit.
It is enabled by default. When the Base Unit is integrated in the corporate network, it may be required to
disable content sharing from the ClickShare app.
About streaming information via AirPlay
Before you can stream information and display it via ClickShare your device must be connected with the
wireless network of the Base Unit. Then AirPlay must be activated on your device. For more information about
activating AirPlay, consult the user guide of your device.
The supported versions of AirPlay can be found on Barco’s website,
www.barco.com\clickshare
. The support
of non-released version of these protocols cannot be guaranteed by Barco.
About streaming via Google Cast
Before you can mirror information and display it via ClickShare your device must be connected with the
wireless network of the Base Unit. When activating Google Cast on your device an overview of the access
points is given. For more information about using Google Cast, consult the user guide of your device.
The supported versions of Google Cast can be found on Barco’s website,
www.barco.com\clickshare
. The
support of non-released version of these protocols cannot be guaranteed by Barco.
Google Cast does not support a passcode.
Google Cast can only be used when the clock of the Base Unit is set correctly. If not Google Cast
cannot make a connection with the Base Unit.
About streaming via Miracast™
Miracast™ enables seamless display of multimedia content between Miracast® devices. Miracast allows
users to wirelessly share multimedia, including high-resolution pictures and high-definition (HD) video content
between Wi-Fi devices, even if a Wi-Fi network is not available.
Miracast sets up its own network to stream information and display it via ClickShare so there is no need for a
direct connection with the Base Unit. Miracast must be activated on your device. For more information about
activating Miracast, consult the user guide of your device.
The supported versions of Miracast can be found on Barco’s website,
www.barco.com\clickshare . The support
of non-released version of these protocols cannot be guaranteed by Barco.
How to enable
1. Log in to the
Configurator
.
2. Click Wi-Fi & Network → Services .
CX-50 Gen2 Configurator