![background image](http://html1.mh-extra.com/html/barco/barcoslm-r6/barcoslm-r6_owners-manual_473914029.webp)
4. Connections
4. CONNECTIONS
Overview
•
•
•
•
•
•
4.1 Power connection
AC Power cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector
at the left of the projector.
The power input is 110VAC / 230 VAC.
Fuses
For continued protection against fire hazard :
•
refer replacement to qualified service personnel.
•
ask to replace with the same type of fuse (T7 AH/250V).
4.2 Switching on
How to switch on.
1. Press the power switch to switch on the projector.
-
When ’0’ is visible, the projector is switched off.
-
When ’1’ is visible, the projector is switched on
The projector starts in standby mode. The projector indication lamp is red.
Starting image projection.
1. Press
Stand by
key once on the local keypad or on the remote control.
The projector mode indication lamp will be green (image 4-1)
Or,
Press a digit button to select an input source.
Image 4-1
Standby indication
R5976483 BARCOSLM R6 17092002
25
Summary of Contents for BARCOSLM R6
